La nueva serie RX Hitachi, la codificadora inkjet último modelo de la compañía japonesa, ha obtenido la certificación oficial que la acredita como la impresora industrial con el consumo de disolvente más bajo del mercado. El pasado 4 de marzo el Colegio Oficial de Ingenieros Técnicos Industriales de Madrid, expidió el certificado oficial sobre la medición de consumos de disolvente. El estudio se realizó en los laboratorios de Trébol Group Providers, poniendo a prueba dos impresoras inkjet Hitachi RX-S, durante 100 horas interrumpidas y a una temperatura ambiente de 20º. El análisis fue desarrollado en condiciones ambientales y horarias ajustadas a las condiciones reales de trabajo en plantas de producción, para asegurar que los resultados además de estrictamente reales, fueran vinculantes en circunstancias operativas. Los resultados avalaron un consumo promedio de disolvente inferior a 3,5 ml/hora, con tintas base MEK. Y un espectacular consumo inferior a 1,75 ml/hora para tintas con base Etanol. Estos rendimientos sitúan a las impresoras Hitachi como las codificadoras inkjet con un consumo de disolvente más bajo del mercado. Resultados especialmente significativos al estar certificados oficialmente y haberse obtenido en condiciones normales de funcionamiento del equipo dentro de una cadena de producción. El bajo consumo de disolvente es un factor clave para la elección de un equipo de marcaje industrial, debido a las grandes ventajas que proporciona: - Ahorro constante: Al haber una menor evaporación del líquido, el equipo gasta mucho menos. Las recargas de fluido se reducen drásticamente, y con ello el gasto asociado a su consumo, que en comparación con otras marcas y modelos puede suponer un ahorro de un 60%. El mínimo consumo es especialmente visible cuando los equipos trabajan en condiciones ambientales con temperaturas elevadas (a partir de 30ºC). - Respeto al medio ambiente: Al minimizar las emisiones de disolvente a la atmosfera. - Ausencia de olores: Especialmente importante en empresas del sector alimentario o farmacéutico (salas blancas) - Mayor autonomía del equipo: Mejorando su productividad y limitando al máximo las tareas de mantenimiento. RX es el modelo más reciente de codificadores industriales Hitachi. Las impresoras inkjet de la multinacional japonesa siempre han destacado por dos valores: fiabilidad absoluta y facilidad de uso. Sobre estos valores, el equipo de I+D Hitachi basó el desarrollo de la serie RX en la consecución de un objetivo: El mínimo consumo del equipo. Un objetivo que hoy se puede avalar de forma oficial, consiguiendo un espectacular ahorro económico y un exquisito respeto medioambiental. El estudio fue encargado y realizado en los laboratorios de Trebol Group, distribuidor oficial de los codificadores inkjet Hitachi en España y Portugal. Con más de diez años de experiencia y delegaciones por toda la península, Trebol Group ofrece una solución global de codificación y marcaje industrial. Más info: www.trebolgroup.com

Flöter introduces the next generation of air cushion machines: the AirWavePRO. The AirWavePRO is the most innovative air cushion machine from Flöter. With numerous new features and even more speed, it impresses with outstanding reliability. The AirWavePRO is just as compact and flexible to use as the other machines in the AirWave family. -High-quality modern design -8-pin connection socket -‘Lock function, one-key technology -Double sealing unit for low wear on belts and rollers -4 storage locations -Weight 5,8kg 6-24m/min. fast / 4 levels -Impulse heating for short heat-up time -Universal power supply 115 - 230 Volt -Bluetooth control With the AirWavePRO you can produce a wide range of AirWave air cusion filler (210mm wide) and wrapper (420mm wide).

Water-soluble transport protection for even more sustainable packaging AquaWave air cushions are an FSC® (C162510) certified water-soluble and therefore biodegradable solution for the safe protection of your packaged goods. FLOETER's latest innovation is the advancement of the PaperWave air cushion. It once again underlines the company's commitment to sustainability in the packaging market. Made from 100% recycled paper, the air cushions are high-performance and ecologically beneficial. This is underlined by the ClimatePartner certification, which calculates and improves or offsets the CO2 footprint. The sealing layer is ultra-thin and consists of polyvinyl alcohol. This disappears on contact with both warm and cold water. No microplastics are left behind. AquaWave® air cushions are ideal for users who want environmentally friendly and, above all, plastic-free packaging.

Brother is launching two new 2-inch linerless desktop label printers: the TD-2320DFC203 and TD-2350DFC203. These models maintain the compact design, ease of use and direct thermal technology with the advantage of working exclusively with paperless label rolls, among other features. This feature provides greater productivity and autonomy, optimising and saving time on labelling tasks, essential in sectors such as food and beverage, retail, healthcare and logistics. Brother is completing its linerless label printing solutions offering, a technology in growing demand due to its positive impact on operational efficiency and sustainability, with a total of 12 models: 4 desktop (TD series) and 8 portable (RJ series). With these innovations, Brother continues to lead the market with solutions that combine efficiency, flexibility and sustainability, meeting growing customer demand.

Brother is launching a new range of Brother Safety Solutions, designed to meet the needs of both indoor and outdoor marking and signage. The range comprises 262 consumables for a variety of uses and specialist label creation software. The new Brother Safety range includes a wide range of labelling consumables, which stand out for their durability and adaptability to different situations, with continuous vinyl labels, pre-cut labels, tube marking rolls and specific CLP/GHS and LOTO labelling solutions. To complement these solutions, Brother is also offering two packs that include everything you need to get started: Simple and Complete. The Simple Pack consists of a TD-4420TN label printer with cutter installed, and the Complete Pack includes the TD-4420TN label printer with cutter installed and Safety Label Pro software. These packs have been designed to provide a turnkey solution and simplify the adoption of these technologies in industrial, logistics and healthcare environments.

Brother has received the Technical Packaging Award 2024 for its new moulded pulp cushioning material, a solution for more compact packaging. This design improves durability while reducing the size compared to traditional designs, reducing the materials used and weight by 33%. In addition, the material allows the volume of boxes to be reduced by 7%. The Japan Packing Institute recognised Brother’s moulded pulp for its compactness and lightness, while maintaining cushioning performance and reducing CO2 emissions during production and other processes. This award is given to packaging solutions that excel technically in terms of protection, preservation and functionality.

Brother is launching nine 2-inch desktop label printers this month, bringing productivity and ease of use to businesses. Label printing is now more efficient, simple and even more intuitive thanks to Brother’s nine 2-inch direct thermal printers. The TD-23D range offers seamless integration, intuitive functionality and high-performance label printing. The key feature of the new range is the ease of customising the printer to suit each customer’s needs. These printers allow for the installation of a monochrome LCD display or a colour touch screen, the ability to personalise the touch screen and also the ability to access labels loaded into the printer’s memory. A range of optional accessories are also available, including a label cutter or peeler, battery and battery stand to convert the device into a portable printer that can be taken anywhere. The desktop label printer range is ideal for the retail, healthcare and food sectors.

Camaleo is an innovative proposal in the world of POS, designed to evolve with the needs of brands and their sustainability. Made from sustainable MDF and with high-quality UV printing, this display stands out for its reusable and adaptable nature. Thanks to a system of interchangeable sheets, Camaleo allows its colour and design to be changed in seconds, creating a renewed visual impact without having to replace the entire structure. This flexibility makes Camaleo the ideal choice for campaigns that seek to adapt to seasonal or brand trends without generating unnecessary waste. By avoiding the use of single-use displays, Camaleo significantly reduces CO₂ emissions, setting a new standard for environmental responsibility at the point of sale. Its robust and durable structure ensures that it can withstand multiple update cycles without losing its integrity. Camaleo is not just a display, it is a comprehensive solution that combines design, sustainability and versatility. Its ability to transform the sales space with simple and effective changes makes it the perfect ally for any campaign. Ideal for brands looking to stand out in an innovative and eco-responsible way, Camaleo is ready to take point-of-sale marketing to the next level.

To enable the exquisite products to stand out at POS, Jantex looked for an extraordinary packaging: a bag with a stunning design, of a construction that makes it stand prominently on the supermarket shelves and present the product the best possible way. Barrier properties were required to protect the delicate aroma of the exquisite mushrooms. Finally, the bag had to function as a container in the household, also once half emptied. All requirements were met by the Schur®Star Stand-up Bag – produced of a CPP film and decorated with a charming design emphasizing the product itself. To match the healthy profile a fully recyclable material was the obvious choice, and the bags were thus produced of a CPP film. Although the glossy and stiff appearance is achieved through the material, it is a single-substrate which does not require separation and can be recovered via a recycling structure. The film offers excellent printability and mechanical strength in the packing process.

Since 2022 the label market has been volatile, so we should expect continued price increases as supply is restricted and demand for labels continues to increase. Raw material shortages and a lack of capacity for pressure-sensitive label materials have impacted the labeling industry, causing order delays, affecting the entire product supply chain. The supply and demand for labels are not in balance. Suppliers have raised material costs several times in the past 20 months, and many of them are giving long lead times to their customers. One of the big takeaways when comparing inkjet coders to labeling or thermal transfer machines is cost. Considering the cost of the label and thermal transfer ribbons, inkjet printing is typically one-tenth the cost of a label. Labor cost is also a factor to consider when deciding between labeling or inkjet printing. Additionally, label applicators typically experience more downtime than inkjet printers. When the labeler runs out of labels or tapes, the production line must stop to restock. If a large amount of product needs to go out, this may require multiple stops throughout the day. Inkjet printers use ink cartridges. When an ink cartridge runs out, the cartridge can be changed on the fly with no downtime. The quick-change ink cartridge allows users to keep their line running, reducing downtime and maximizing ROI. Overall, an inkjet printer provides a cost-effective solution for making your mark on various products and substrates.

Invisible ink coding in the field of industrial marking is often used for traceability or security applications that want to remain hidden from the eyes of the end consumer. It is important to remember that this ink becomes visible under ultraviolet light, so it is very easy to carry out security checks during the production process. Once the packer fills the container, a second marking is carried out with information such as the batch number of the soft drink or its expiration date. Data of paramount value to the final consumer, which is why it is done with standard black ink. In this way, the internal traceability information only useful for the manufacturer is hidden, preventing the final consumer from confusing both information. Another common use of invisible ink is in the high-end cosmetics industry. In a sector where counterfeit products are one of the main problems, invisible markings are an important defensive tool for manufacturers. The most typical application is the marking of product packaging with security codes. This allows distribution chains (perfumeries, pharmacies...) to verify the origin and authenticity of the goods. And to the large luxury manufacturers to be able to carry out an exhaustive traceability of the route of their products. In this case, and due to the special characteristics of the cosmetic sector, the marking is done with invisible ink to preserve the aesthetics of the product and not dirty the pack with information of no interest to the consumer. The third common application with invisible ink is in the graphic arts sector. It is mainly used to print security codes on official documentation, tickets or promotional coupons. In this case, invisible ink is used as an anti-forgery tool and is an important additional security measure for document verification.

Since the early 2000s, Modula Logística y Almacenaje has been a benchmark in automated warehouses on the Iberian Peninsula. The Castellón subsidiary, established in 2020, has been key to our presence in Spain and Portugal. In 2022, we expanded our offices to accommodate our growing team and improve customer responsiveness. In 2023, we built a showroom with automated warehouses and picking systems for customers to experience our products. In 2024, we completed a new warehouse, significantly expanding our facilities and streamlining operational processes. The modern architecture and state-of-the-art facilities reflect our commitment to excellence. The Iberian subsidiary is one of the most important within our global network, managing a high volume of sales and operated by a talented team of 40 professionals and more than 50 external certified technicians. Each member is fundamental to our achievements and we continue to move towards new goals. On 22 May, we organised an event to celebrate the expansion and opening of the new warehouse, with an inspiring speech by president Franco Stefani and the official ribbon cutting. This new building in Castellón is a strategic investment in Modula's future, designed with a focus on sustainability and employee wellbeing. Equipped with advanced technology, it includes an installation of solar panels and electric car chargers, improving energy efficiency and reducing environmental impact. The working environment fosters collaboration and professional development, reflecting our philosophy of caring for and supporting our team. Our innovations include Modula Pallet and Modula Next, improving safety and operational efficiency. We thank everyone who has contributed to our success. Without the support of customers, employees and partners, this achievement would not have been possible.

POLIPOP is proud to have maintained the ISO 9001 certification from APCER since 2018. This certification recognizes our commitment to quality management, continuous improvement and customer satisfaction. The ISO 9001 certification is an international benchmark that ensures that our processes and products follow strict quality standards, promoting efficiency, innovation and excellence in the service we provide. This milestone reinforces our mission to offer high-quality solutions that meet the needs and expectations of our customers, in accordance with the best practices in the sector. We thank the entire Polipop team, our partners and customers for being part of this journey. We remain committed to evolving and overcoming challenges, always focusing on quality and sustainability.

Due to the rich texture of salads, sealing of the filled bag can be an issue as product residues tend to stick to the bag opening. The Schur®Star Packaging Machine offers a rectangular fill opening measuring the full bag width specifically designed to ease the packing of products that are difficult to handle. By taking advantage of the long filling line Naylor Farms have employed double filling. The results: No more product clinging to the bag opening, no more sealing issues and no more costly downtime. Packing speed and overall production capacity have been improved considerably without increasing labour. The ready-to-enjoy salads are sold in a stand-up bag construction that ensures the product full attention at POS equipped with a window allowing a glimpse of the contents. To complete the concept of high convenience, the bag is manufactured with a practical laser-score for easy opening and a reclosability feature for convenient storage of any salad that is not consumed initially.